Name: 125-150W LED Aquarium Light

Model:CNC-SZ04-B

------front view of 125-150W LED Aquarium Light

------Back view of 125-150W LED Aquarium Light

Introduction:

1. Use high quality LED lighting source, the lifespan is up to 50000 hours.

2. Replace 3~5 times of the HPSL power, 80% electric energy saving than the tradition HPSL and MHL.

3. High lighting effect, 90% of the light will be absorbed by the aquatic plant, but to the traditional HPSL and MHL, the lighting effect is just 8%~10%.  

4. Input cooling system, well solve the heat sink problem.

5. The input voltage is AC100V~240V,suitable for the world standard. Built-in power supply. No need other equipment, just access AC100~240V voltage from the plug, the lamp will be working smoothly, don't need the reflector and ballast either.

6. The lighting area and the height are changeable according to different plants and environments, the same as the parameter .

7. Environment-friendly, no mercury and other harmful heavy metal.

8. Customers can choose different ratios, Our suggestion is white: blue=2:1 or 1:2, the common temperature of the white is 12000~14000K or 6500K, the wavelength of the blue is 460-470nm. The mixed light of red, blue, orange, yellow, UV, IR and white provide the hydrophyte needed light spectrum.The white LED colour temperature for the fresh water tank is 6500K, 12000-14000K for the salty water, the blue light are good for the growth of hydrophyte, customers also can choose the more suitable wavelength and LED colors.

--------On/ Off switch design of  125-150W LED Aquarium Light

------120W LED Aquarium Light On Lighting

(Remarks: the irradiation area is base on PAR value＞10 )

-------- The Detailed Picture of  125-150W LED Aquarium Light 

Unique innovative ideas:

I. Double cages structural heat dissipation design,better cooling performance

   The double cages structural design change the heat dissipation mode of the traditional LED Aquarium Light, divide the inside of the lamp to tow parts, and form two heat-dissipation cages, cut off the internal thermal cycle effectively and reach the best cooling performance.

   Use the unique air-out design and open air exhaust in the two sides of the lamp, remove the high temperature air rapidly, ensure the light body operation in a low-temperature environment.

II. Prevent drippage water design

   The lid of the light is with sloping ends and 5°angled holes to prevent the light from the damaging of drippage and dust.

III. High quality 3W LED+700mAcurrent=The top performance

   700 mA is the best drive current for 3W LEDs,runing LEDs with possibly high current can take full advantage of LEDs, making your initial investment in LED devices to be well worth it.However, LEDs and LED drivers should be of superior quality as so to undertake the high electric current, besides the entire equipment should be good enough in heat dissipating to bear all the heat emitted by 3w leds.Selects the finest LEDs and drivers to ensure the stable performance as well as the long life span of the fixtures,our three-year warranty policy proves our confidence in products.

IV. Modularity design

   Modularity design, each part interconnect by the male female plug directly, very easy for repairment and maintenance, only few steps to assemble up the whole fixture.

V. RTPM intelligent control system(Remote,Dimming,Timing and Temperature control)      

   RTPM is a multifunction intelligent system, including remote, dimming, timing, custom temperature control and mult-unit chaining function. In order to meet the growth demand of all kinds plants, the users can choose various different lighting effect scheme.

1,Remote-controlled, dimming and timing

   There are three controllable circuits in the light, the brightness value is 0%-100%, in order to add and reduce the adjustable brightness , 1% or 10% is available, also,  1% is allowed to adjust the brightness in the single circuit. Four time bucket can be set on brightness in each circuit. In the right system time setting circumatances, when the time reach timing time bucket, the hole light will turn into the timing preinstall brightness automatic.,24 hours continuous cycle.(Please see the remote operation instruction manual )

2,Temperature control and protection

   When the heat sink temperature over 65℃, the intelligent temperature control will cut off the power supply system automatic. The system will outo star when the temperature cooling to 50°.

3,Data memory

   The brightness and timing setting will auto-save after setting 45 seconds, the lamp will enter the setting brightness condition last time when it electrify and get to work next time. The system time will keep the clock continuous operation about 3 months after the lamp completely without electricity, the built-in superbattery will be full charged within 20 seconds. Also, it without needing battery replacements.

------- The side view of  125-150W LED Aquarium Light

Application:

Ideal for all the aquatic organisms, use the blue lights at night, can appear the fluorescence colour of the corals and the software fish, more gorgeous and bright-coloured, stronger penetration and the best ornamental effects.

Attention:  

1. In order to save energy, please turn off the power if not use the lamp in a long time.

2. Do not use the lights in dripping water or anywhere where they will get wet, water and electricity can be a dangerous mixture.

3. The working environment for the light is -20~40℃,45%RH~90%RH.

4. To protect the light, Pls cut off the power when there is a lightning strike.  

5. Don't touch or move when the light working.

6. The above parameters are according to the conventional ratio(White:blue=1:2), customers can choose different ratio according to different require.