Product name: 70W LED Tunnel Floodlight Fitting

Model: CNC-TL-A-1x70W

----Picture of 70W LED Tunnel Floodlight Fitting

----Physical sizes of 70W LED Tunnel Floodlight Fitting

Parameter:

Shell Material:Aluminum Alloy

Shell Color:Black

Net Weight:8.5Kg

Input Voltage:AC100～240V

Frequency Range:50～60Hz

Power Factor:>0.97

Power Efficiency:>87%

LED Working Voltage:DC30-36V

LED Power:70W

Total Power:78W

Luminous Efficiency:80～100lm / W

Color Rendering Index:Ra＞70

Beam Angle:100°

LED Reduction Rate:1～3% / 1,000Hrs

Color Temperature:2700～7000K

Working Temperature:-20℃～+45℃

IP Grade:IP65

Working Life-span:>35000H

Power line:VDE 3×1.0mm2

Connect wire:Brown→L  Blue→N  Yellow or Green→G

Speciality:

1. Adopting integrated Chip as light source with high lighting efficiency 80-100LM/W, high CRI(Ra>70), good quality heat dissipation, low light degradation.

2. Aluminum alloy die cast housing, good strength, high quality heat dissipation.anti corrosion and baking varnish surface, can be for outdoor using.

3. Make a dedicated luminous intensity distribution design via the aluminum reflector, there are two options for lighting distribution, one is for focusing, another is for diffusing.

4. Wide Input Voltage from 100V~240VAC,constant voltage constant current output, can start up at once, no flicker, lightning protection, PFC function available.

Diagram of degradation for Luminous:

1. The data above has been got at a temperature of 25 Celsius degree and taking 1000 hours running by a nonstop way.

2. Degradation of luminous flux of LED lamps depends on environmental conditions. The higher the temperature, the longer the using time, the faster luminous flux drops.

----Photomatric Data of 70W LED Tunnel Floodlight Fitting

----Illumination Distance,illuminance,Irradiated Area of 70W LED Tunnel Floodlight Fitting

Packing Dimension:(L)460×(W)340×(H)425mm  2PC/CTN  19Kg

----Packing Picture of 70W LED Tunnel Floodlight Fitting

Installation:

1.As Picture No.1 showed, fix the lamp to mounting surface with 3 screws.

2.As Picture No.2 showed,unscrew the retaining screw,take down the fitting.

3.As Picture No.3 showed, Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.

4.Male Water joint, equip with 1 meter power wire.

5.Female water joint,, can be connected to input end of lamp when the light has been produced.

6.Besides of normal wire connecting way, it's convenient to installation, uninstallation, maintenance with the special equipment.

----Mounting Method of 70W LED Tunnel Floodlight Fitting

Attentions:

1. Only professional electrician can install the lamp, please check the lamp very carefully before installation.

2. Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly, the wires have been connected properly. Please operate according to Product Instructions enclosed.

----Picture of hanging type for 70W LED Tunnel Floodlight Fitting

----Picture of Stand type for 70W LED Tunnel Floodlight Fitting

----Application Picture of 70W LED Tunnel Floodlight Fitting

----Application Picture of 70W LED Tunnel Floodlight Fitting

----Application Picture of 70W LED Tunnel Floodlight Fitting

----Application Picture of 70W LED Tunnel Floodlight Fitting