
CNC Lighting Technology Co., Ltd.
|
Payment Terms: | T/T,L/C,WU |
Place of Origin: | Zhejiang, China (Mainland) |
![]() |
![]() |
Add to My Favorites | |
HiSupplier Escrow |
Product name: IP65 CREE LED Wall Pack Light
Model: CNC-WP-01
----UL & DLC listed LED Wall Pack (30W & 60W)
--------UL & DLC listed LED Wall Pack (100W)
Specification:
Power | HPS/Metal Halide Replacement | Lumen | Certification |
30W-A | 100-200W | 2300-2500Lm | UL & CUL |
30W-B | 100-200W | 2400-2600Lm | UL & CUL+DLC |
60W-A | 200-300W | 4200-4500Lm | UL & CUL |
60W-B | 200-300W | 4500-4800Lm | UL & CUL+DLC |
100W-A | 400-500W | 6500-7000Lm | UL & CUL |
100W-B | 400-500W | 6700-7200Lm | UL & CUL+DLC |
Input Voltages:120-277Vac
CRI: >70Ra
IP Rating:IP65
Operating Temp: -30 ºC to +50 ºC
Operating Humidity: 20% to 90%RH
Power Fact(PF) :0.986
Power Supply Efficiency: > 90%
Color Temperature:3000K(+/-300K), 4000K(+/-300K),6000K (+/-300K)
----Physical sizes of UL & DLC listed LED Wall Pack (30W & 60W)
----Physical sizes of UL & DLC listed LED Wall Pack (100W)
Installation:
1) Use a screwdriver to loosen the screws and open the fixture.
2) Take the back plate from the fixture and drill holes through casting over mounting holes to mount it to the wall/ceiling.
3) Connect the input and ground wires of the driver box to the main power outlet.
4) Connect the LED array to the output leads of driver.
5) Reattach the fixture front to the back plate. Tighten the housing screws to close the fixture.
WARNING:
Disconnect supply power from the source prior to installation.This product must be installed by a
person familiar with the construction and operation of the product and the hazards involved,and in
accordance with current electrical codes and/or the current National Electric Code(NEC).Consult a local licensed electrician if you are not sure about the installation.To reduce potential of electric shock, fixture must be grounded.The electrical input voltage of this product is 120-277V AC.The installer must determine whether power supply is in the range of 120-277V Ac at the luminaire before installation.Do not mount or support these fixtures in a manner that can cut the outer jacket or damage the wire insulations.Do not restrict fixture ventilation.Do not cover fixtures with insulation or any material that will impede air flow.
Light Intensity Distributor Curve:
----Light Intensity Distributor Curve of 60W LED Wall Pack (UL&DLC)
----Light Intensity Distributor Curve of 100W LED Wall Pack (UL&DLC)
----Lux Measurement of 60W LED Wall Pack (UL&DLC)
----Lux Measurement of 100W LED Wall Pack (UL&DLC)
--------UL & DLC listed LED Wall Pack (30W & 60W)
-----UL & DLC listed LED Wall Pack (100W)
-----UL & DLC listed LED Wall Pack (30W & 60W)