IP65 CREE LED Wall Pack (UL&DLC) from China manufacturer

Payment Terms:	T/T,L/C,WU
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: CNC-WP-01

Production Capacity: 3000pcs per month

Approval: UL&CUL DLC Listed

Power supply: Meanwell

Power factors: 0.986

Warranty: 5years

Means of Transport: Ocean,Air;Express

Delivery Date: 10-30 Working days after pa...

LED Chips: CREE

Power available: 30W,60W,100W

IP Rating: IP65

IP65 CREE LED Wall Pack (UL&DLC)
CRI: >70Ra
Approval: UL&CUL DLC Listed
LED Chips: CREE
Power available:30W,60W,100W
Warranty: 5 Years

Product name: IP65 CREE LED Wall Pack with UL & DLC Approval
Model: CNC-WP-01

LED Chips: CREE

Power supply: Meanwell

Approval: UL&CUL DLC Listed

Warranty: 5Years

----30WW & 60W IP65 CREE LED Wall Pack (UL&DLC)

---100W CREE LED Wall Pack(UL&DLC)

Specification:

Power	HPS/Metal Halide Replacement	Lumen	Certification
30W-A	100-200W	2300-2500Lm	UL & CUL
30W-B	100-200W	2400-2600Lm	UL & CUL+DLC
60W-A	200-300W	4200-4500Lm	UL & CUL
60W-B	200-300W	4500-4800Lm	UL & CUL+DLC
100W-A	400-500W	6500-7000Lm	UL & CUL
100W-B	400-500W	6700-7200Lm	UL & CUL+DLC

Input Voltages:120-277Vac

CRI: >70Ra

IP Rating:IP65

Operating Temp: -30 ºC to +50 ºC

Operating Humidity: 20% to 90%RH

Power Fact(PF) :0.986

Power Supply Efficiency: > 90%

Color Temperature:3000K(+/-300K), 4000K(+/-300K),6000K (+/-300K)

----Physical sizes of 30W&60W CREE LED Wall Pack (UL&DLC)

----Physical sizes of 100W CREE LED Wall Pack (UL&DLC)

Light Intensity Distributor Curve:

----Light Intensity Distributor Curve of 60W LED Wall Pack (UL&DLC)

----Light Intensity Distributor Curve of 100W LED Wall Pack (UL&DLC)

----Lux Measurement of 60W LED Wall Pack (UL&DLC)

----Lux Measurement of 100W LED Wall Pack (UL&DLC)

----IP65 CREE LED Wall Pack (UL&DLC)

Installation:

1) Use a screwdriver to loosen the screws and open the fixture.

2) Take the back plate from the fixture and drill holes through casting over mounting holes to mount it to the wall/ceiling.

3) Connect the input and ground wires of the driver box to the main power outlet.

4) Connect the LED array to the output leads of driver.

5) Reattach the fixture front to the back plate. Tighten the housing screws to close the fixture.

WARNING:

Disconnect supply power from the source prior to installation.This product must be installed by a person familiar with the construction and operation of the product and the hazards involved,and in accordance with current electrical codes and/or the current National Electric Code(NEC).Consult a local licensed electrician if you are not sure about the installation.To reduce potential of electric shock, fixture must be grounded.The electrical input voltage of this product is 120-277V AC.The installer must determine whether power supply is in the range of 120-277V Ac at the luminaire before installation.Do not mount or support these fixtures in a manner that can cut the outer jacket or damage the wire insulations.Do not restrict fixture ventilation.Do not cover fixtures with insulation or any material that will impede air flow.